EI120/240CH+
Insulated stainless steel modular metal chimney
Modular multi-fuel chimney for generators and boilers requiring external and internal fire stops
FIRE RESISTANCE CLASSIFICATION
The EI120/240CH+ range has been tested in accordance with EN 1366-13 and classified as "fire resistant" according to the new EN 13501-2-2023 standard according to the new EN 13501-2-2023 standard
EI120 ve (i→o) EI120 ho (i→o)
EI240 ve (o→i) EI240 ho (o→i)
This solution prevents the spread of fire from the outside to the inside and from the inside to the outside, both vertically and horizontally
Attention: The compartmentation elements (SAG, SBG) supplied by Dinak in the wall bushings are necessary to ensure fire classification
Benefits
EI Classification
It has all the certifications required by the CTE for the passage of fire compartments up to EI 120: in interior and exterior fire conditions
This range prevents the spread of fire from the outside to the inside of the duct and vice versa, in vertical and horizontal sectorizations passage
EI 120 ve (i→o) EI 240 ve (o→i)
EI 120 ho (i→o) EI 240 ho (o→i)
CE marking
The EI120/240CH+ range has been tested according to the specific test standard for fireplaces, EN 1366-13, and classified as "fire resistant" according to the new revision of the classification standard EN 13501-2:2023
Easy installation
The connection system between parts facilitates their installation, speeding up installation times and guaranteeing gas tightness. Assembly without the need for press-fitting
Assembly
Technical features
Generic
Sealing in the joints between elements, by means of gasket+
Inner sealing gasket for condensation installations
Internal and external laser welding
Spacing : 40 mm
Available diameters : Ø80 to 800 mm
Materials and thicknesses
Inner wall :
Stainless steel AISI 316L (1.4404) Stainless steel AISI 304 (1.4301)
Outer wall :
Stainless steel AISI 304 (1.4301)
Insulation :
Mineral wool 100 mm thick
Temperature classes
Maximum working temperature 600°C
Sealing classes
Sealing class:
H1 (up to 5.000 Pa)
P1 (up to 200 Pa)
Diameters
With J+ seal
80/280 | 100/300 | 125/325 | 150/350 | 175/375 | 200/400 |
250/450 | 300/500 | 350/550 | 400/600 | 450/650 | 500/700 |
550/750 | 600/800 | 650/850 | 700/900 | 750/950 | 800/1000 |
With seal+ and outer seal (for condensation)
80/280 | 100/300 | 125/325 | 150/350 | 175/375 | 200/400 |
250/450 | 300/500 | 350/550 | 400/600 | 450/650 | 500/700 |
550/750 | 600/800 | 650/850 | 700/900 | 750/950 | 800/1000 |
Certifications
