Customized comprehensive projects
We take all factors into account
Ambient temperature, max. and min.
Appliance technical data is used to determine the material and corss-section of the flue, as well as to check the height by means of enviromental criteria.
Number of Appliances
Type of appliance
Power (kW, Kcal/h)
Gas flow rate, mass (Kg/h) or volume (m3/h, Nm3/h)
Nominal/minimum gas temperature (ºC)
Minimum draught or maximum available overpressure (Pa, mm wc)
Gas outlet diameter (mm) or flange (mm)
Optimal configuration (CIR, CER. CERm, Structures)
Technical and architectural requirements
Optional equipment (ladders, platforms, lightning conductors, sampling points, beaconing...)
The arrangement of the connecting sections between the generators and the self-supporting structure or chimney must be defined in order to calculate the cross-section of the flues.
Knowledge of the particular situations on the site is essential for the smooth running of the project.
Fixings or supports
Access conditions and limitations
Every aspect of project development is carried out according to the highest international and national standards.
Materials and thicknesses
Corten steel (minimum S235JRW)
Stainless Steel AISI 304 (1.4301)
AISI 316L Stainless Steel (1.4404)
Carbon steel (S235JR)
Corten steel (S235JRW)
High density rock wool
Stainless steel AISI 304 BA (1.4301)
Stainless steel AISI 316L BA (1.4404)
Lacquered according to RAL colours according to EN ISO 12944
For other finishes, please contact Dinak