Dinagas+
Dual functionality and high performance
Stainless steel concentric modular chimney for overpressure evacuation for room-sealed gas condensing gas boilers
The combustion gases from each appliance are discharged to the roof via the inner flue and the air required for combustion is supplied via the outer concentric flue
This system can only be used with gas boilers type C(10)2, C(10)3, C42P or C43P, and must be fitted with a non-return clapper
Do you want more info?
Contact usBenefits
Reduction of installation space
By sizing in overpressure, the diameters obtained are smaller, and consequently the chimney needs less space
Kits
Easy and simple assembly with the 4 models of kits available. It is possible to carry out the complete installation quickly and safely
Global solution for renovation
The chimney makes it possible to connect new boilers as they are replaced, and to continue evacuating the combustion gases through the roof
Assembly
Technical features
Generic
Overlap: 40 mm
Sealing joint on the inner and outer wall
Maximum two connections per floor
Bright stainless steel finish, or galvanised steel for internal installation
Materials and thicknesses
Inner wall:
Stainless steel AISI 316L (1.4404)
Thickness: 0.4 mm
Outer wall:
Stainless steel AISI 304 (1.4301) or AISI 316L (1.4404)
Galvanised steel (only for internal installations)
Thicknesses:
0,4 mm from Ø80/125 to 200/300 mm
0.5 mm for Ø250/400 mm
Thickness:
0.5 mm
Optional Lacquered according RAL range
Insulation:
30 mm rock wool of 100 kg/m3 density
Temperature classes
Up to 200ºC (T200)
Sealing classes
P1 (up to 200 Pa at overpressure)
Diameters
80/125 | 100/150 |
110/175 | 125/200 |
150/225 | 175/275 |
200/300 | 250/400 |
Certifications
Products
